MRL Equipment Co.Alternate Used Equipment

Features

139,000 miles
260CFM compressor 10,000 hours
1100 gallon tank (split 66% yellow 33% white)
7000# bead tank
Operator enclosure with heat and A/C
Skipline SC-12 with film build monitor
GL3000P remote adjust laser
Flush on the fly guns
Paint heating system
David Clark communications
Truck is mint condition, meticulously serviced, and currently in everyday operation.

Features

Cab & Chassis: 2009 Peterbilt 320

• 170,950 Miles; 350 HP Cummins
• Allison Automatic Transmission
• 64,000 GVW
• Dual Steering
• Tandem Rears
• Front Tires: 425/65R22.5; 22,800 lb rating
• Rear Tires:  11R22.5; 24,020 lb rating

Spray Deck:

• 1997 MB Epoxy Paint Truck with Doghouse
• Serial #: 6-0769
• John Deere Pony Motor; 2015 In-chassis rebuild
• Atlas Copco Compressor
• 3- 300 Gallon Material Tanks
• 2- 5500 lb Bead Tanks, Vacum Load
• 2- 6.7 GPM Binks Proportioning Pumps
• 6- Nitrogen charged Accumulators
• 2- Hydraulic Accumulators
• Graco Guns with Auto Lift
• 2 color Detail Cart w/ 30ft Umbilical Hose
• 6- MB Bead Dispensers
• MB 3001 Micro Processor

Material Heating System:

• 3- 3 Part, Large Bosco Heat Exchangers
• 2-Circulating pumps, Wayne Burner fired Furnace
• Glycol Heated Lines.
• Graco Solvent Pump with 15 Gal Tank.

MB Company Original Manual/Spec Sheets

Truck is currently in service

Features

2016 Mini Mac 400 with only 186 hours

Features

•               Mileage              2,714
•               Truck Hours       209.7
•               Compressor       112.8

Features

• 209,215 Kilometers 275 HP ISUZU Engine , Allison 3000 series Transmission
• 1040 Litre air atomized paint truck
• 1 – 2973 Liter paint tank (Yellow)
• 1 – 3642 Liter paint tank (White)
• 2 – 1350KG bead tanks
• John Deere air compressor with 8086 hours
• Agritronics Model 9420 Skipline controls
• 4 lasers (2 on top , 1 on each carriage )
• Headsets Sigtronics Ietercm , Noise cancelling head set
• 3 Graco high pressure paint pumps
• 2 Diaghpgramfix pumps (Graco)
• Paint guns: 2 White and 6 Yellow 3 bead on left side 4 White 2 bead right side
• Well maintained and ready to stripe.

Features

• 235,070 miles, 8,190 hours, and 60,000 lb. GVW.  Has an air suspension with brand new airbags, new air tanks, entirely new rear suspension, new lift gate on driver’s side, new steer tires, all new belts, new battery tray, and has been freshly serviced.
• MRL kettles are new last year, diesel fired with only 234 hours on the Kubota engine and less than 10,000 lbs. of thermo material run through them.

Features

• Propane fired with 1000 lb. kettle and 250 lb. bead tank
• Ford motor runs on propane – tanks in back supply everything

Features

• 146,000 Miles
• 5,255 Compressor Hours
• Pumps are in good condition
• Equipped with Hydrostatic drive system

Features

Features

Features

• 6 Box Grinder Truck
• Mack with 62,000 Miles
• VMAC Compressor with 6 hours
• Cummins Hyd. Drive Motor with 3,172 Hours
• Truck has 12 heads on it in good condition
• Truck has been well maintained and serviced

Features

• GMC with 248,000 Miles
• Boss Compressor with 2,577 Hours
• Cummins Hyd. Drive Motor with 3,172 Hours
• 450 gal. Paint Tanks
• 4,000 lb. Bead Tank

Features

• 260K miles
• (4) 2,500 lb. diesel fired kettles
• 2,000 lb. bead tank
• Boss Compressor
• Cummins Pony Motor
• Pumper for ribbon application

Features

• 190,027 miles on a 7.8 6HK1, Allison 3000 series Transmission
• 800 gallon air atomized paint truck
• 2 of 400 gal paint tanks
• 6000# bead tank
• 60 gal cleaner tank
• 250 cfm Ingersol Rand compressor (P250WJDU)  with John Deere 4045D with  4330 hours
• MP3001 Skipline controls
• GL3000P laser
• David Clark U3800 Head set station
• 5” color rearview system
• T8 Wilden paint pumps
• Basco Heat exchangers heated by engine coolant
• Kamber 38-20 paint guns: 1 W and 2 Yellow on CL, 1 W on EL
• Kamber 90Ho bead guns 3 total (2 CL, 1 EL)
• Owned since new, well maintained and ready to stripe.  Newer front brakes, heat exchanger rebuild, guns rebuilt, and radiator.  All service/repair documents available.

Features

Features

• Low Hours

Features

Features

MRL 8-75-E Epoxy Striping Truck with M7 Monitoring System