Sometimes a new piece of equipment may not be the best answer for expanding your business, or for that unexpected big job that you may have just landed.

MRL offers used water borne paint, thermoplastic, and plural component epoxy/polyurea application units in numerous sizes. Line removal units, some with grooving capabilities are also available.

Please call our office at 1-877-788-2907 or use our Contact Form to discuss the details of your used equipment requirements.


2003 MRL 4-8000 Thermo Truck

CLICK IMAGE TO ENLARGE

Features

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2016 MRL 4-16000-ADG Thermo Truck

CLICK IMAGE TO ENLARGE

Features

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2015 Stripe Hog SH-8000

CLICK IMAGE TO ENLARGE

Features

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2013 MRL Grinder Truck

CLICK IMAGE TO ENLARGE

Features

  • 6 Box Grinder Truck
  • Mack with 62,000 Miles
  • VMAC Compressor with 6 hours
  • Cummins Hyd. Drive Motor with 3,172 Hours
  • Truck has 12 heads on it in good condition
  • Truck has been well maintained and serviced

Price

SOLD

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

1999 LDI Paint Truck

CLICK IMAGE TO ENLARGE

Features

  • GMC with 248,000 Miles
  • Boss Compressor with 2,577 Hours
  • Cummins Hyd. Drive Motor with 3,172 Hours
  • 450 gal. Paint Tanks
  • 4,000 lb. Bead Tank

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

1998 MRL Paint Truck

CLICK IMAGE TO ENLARGE

Features

Cab/chassis

  • Unit was purchased new from MRL in 1998 – Serial #98101
  • 1997 Volvo FE42 cab, engine, and chassis – 33,000GVWR
  • Allison AT MD3060P transmission
  • Mileage shown is 228,188 but is inaccurate.  Stuck on that mileage since 8/1/16.  Hub meter was installed on 10/10/18 and is currently showing 4983.  Vehicle averages 5k-6k miles per year.
  • Steerable pusher axle was installed in 2007
  • Dual steering  and controls
  • Synthetic fluids

 

Compressor

  • LeRoi 185 CFM utility mount compressor
  • 10,103 hours
  • John Deere engine
  • Synthetic fluids

 

Apparatus

  • 275 gallon stainless steel paint tanks – pressure pots
  • 6000 lb bead tank with vacuum loading
  • SS plumbing throughout
  • Heating system including Axeman-Anderson furnace, Beckett burner, Basco stainless steel heat exchangers
  • Three(3) Kamber XHO pain guns (2 CL side, 1 EL side) with linear actuators to raise and lower
  • Three(3) MRL Bead guns (2 CL side, 1 EL side)
  • Two (2) Binks 2001 hand guns for auxiliary painting.  One(1) Binks 2001 gun for beads
  • Skip-Line timing system
  • EPIC M7 data logging system – includes 3 scales per tank, laptop, environmental sensors, certification for 2019
  • HD video guidance system with 2 cameras and color monitor
  • MRL “Stinger” pointer bar – modified to allow for single person switched from either side
  • David Clark aviation intercom system with headsets
  • 4’ X 8’ arrow board with linear actuator to raise and lower the board
  • 48” lightbar and multiple strobes on rear
  • Multiple tool boxes
  • Flush tank and plumbing
  • “WET PAINT” and “DO NOT PASS” signs

 

The vehicle was being utilized in daily fleet operations in Ohio in 2019, but has been deactivated for the off season.  Unit was cleaned out, year end maintenance was performed, and is ready to stripe.

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2005 Chevy T8500 MB Thermoplastic Truck

CLICK IMAGE TO ENLARGE

Features

  • 260K miles
  • (4) 2,500 lb. diesel fired kettles
  • 2,000 lb. bead tank
  • Boss Compressor
  • Cummins Pony Motor
  • Pumper for ribbon application

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2007 GMC T8500 Paint Truck

CLICK IMAGE TO ENLARGE

Features

  • 190,027 miles on a 7.8 6HK1, Allison 3000 series Transmission
  • 800 gallon air atomized paint truck
  • 2 of 400 gal paint tanks
  • 6000# bead tank
  • 60 gal cleaner tank
  • 250 cfm Ingersol Rand compressor (P250WJDU)  with John Deere 4045D with  4330 hours
  • MP3001 Skipline controls
  • GL3000P laser
  • David Clark U3800 Head set station
  • 5” color rearview system
  • T8 Wilden paint pumps
  • Basco Heat exchangers heated by engine coolant
  • Kamber 38-20 paint guns: 1 W and 2 Yellow on CL, 1 W on EL
  • Kamber 90Ho bead guns 3 total (2 CL, 1 EL)
  • Owned since new, well maintained and ready to stripe.  Newer front brakes, heat exchanger rebuild, guns rebuilt, and radiator.  All service/repair documents available.

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2008 GMC T8500 MRL Paint Truck

CLICK IMAGE TO ENLARGE

Features

  • 158,901 miles
  • Wheelbase 188
  • 330 gallon paint tanks
  • Dual bed tanks
  • Closed loop heating system for paint
  • Double drop bead guns (MRL High flow)
  • Kamber 38-20 paint guns
  • Wilden P4 paint pumps
  • Skip line controls
  • David Clark intercom system
  • Red lion counters and computer tracking for paint usage
  • Wanco arrow board WB8
  • Camera system
  • Antunes temperature controllers
  • Newer Boss 225 CFM compressor driven by a John Deere Diesel engine (1009 hours)
  • 2 paint and bead gun set up on EL side.  3 paint and bead gun set up on CL side
  • Recent done: Turbo, exhaust manifolds, egr coolers, guns rebuilt, rear drums and pads both axles, new EMG2000 light bar, Front axle bearings, seals and brakes, rear engine seal done by GMC.  Well Maintained and ready to stripe.

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2004 Isuzu FVR 4 Box Grinder Truck

CLICK IMAGE TO ENLARGE

Features

  • 7.8 Diesel 220,000 miles and Allison Transmission
  • MRL truck s/n 04308 model 3-410-D
  • 4 box set up with 8 drums, 12” with 9.5 width (9” cut path), Saw on front left to cut 101 RPM’s
  • Drums are 7 shaft Smith Manufacturing with Smith 12 point cutters
  • Has Donaldson Torit DRO 2-4 dust collector with 4 oval dust filters
  • Hepa filter add on
  • 2 of 55 gal drum debris barrels with hydraulic lifts
  • Skipline SM-5 controls
  • Laserline Laser

 

Recent new parts:

  • New VMAC predatair 40 compressor from MRL
  • Cummins B5.9 rear engine rebuilt  (gaskets, head checked, cylinders checked, turbo and water pump replaced)
  • Radiator for cummins replaced
  • Turbo and water pump done on front engine
  • Drum lift cylinders rebuilt
  • Front engine radiator and thermostats

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com jthompson@markritelines.com

2016 Paint Truck

CLICK IMAGE TO ENLARGE

Features

  • 2016 International 4300 SBA 4×2 truck, 37K miles
  • Two (2) 160-gallon paint tanks
  • 2,400 lb. bead tank
  • 210 CFM air compressor
  • Skipline Timing system
  • Rear 4’x8′ arrow board
  • Night lights, and front & rear strobes
  • Camera System

Price

Call for pricing

Contact

Kent Klein, James Thompson, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

2018 MRL Model 3-420-AD3K Grinder Truck

CLICK IMAGE TO ENLARGE

Features

Price

Call for pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

2015 MRL Mini Mac 400

CLICK IMAGE TO ENLARGE

Features

  • Low Hours

Price

Call for pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

2006 MRL Grinder Truck

CLICK IMAGE TO ENLARGE

Features

156K Miles

1640.2 Hydraulic Engine Hours

14 Heads in Good, Working Condition, includes the 6 boxes full & 2 spare heads, all loaded with teeth

Price

Call for pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

1999 Airless Paint Truck

GVWR 33,000 lbs.

CLICK IMAGE TO ENLARGE

Features

Price

Call for pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

2001 MRL 4-8000 Thermoplastic Striping Apparatus

CLICK IMAGE TO ENLARGE

Features

  • 2001 MRL 4-8000 Thermoplastic Striping Apparatus on an Autocar Xpeditor
  • Currently in everyday use

Price

Call for pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

1999 NLB Ultraclean 36 Waterblaster

CLICK IMAGE TO ENLARGE

Features

Price

Call for pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

1997 MRL Polyurea Striping Truck

CLICK IMAGE TO ENLARGE

Features

  • Impingement
  • 3 Each 275 gallon tanks
  • 4,000 lb. Split Element Tank
  • Dedicated White and Yellow Hand Gun

Price

Call for pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

2005 MRL Epoxy Striping Truck

CLICK IMAGE TO ENLARGE

Features

MRL 8-75-E Epoxy Striping Truck with M7 Monitoring System

Price

Call for Pricing

Contact


406-869-9900

2007 GMC T-7500 Epoxy Detail Marking Truck

CLICK IMAGE TO ENLARGE

Features

  • 26,000 GVW
  • 180 gallon capacity
  • Mix tube handgun
  • Pressurized glass bead tank

 

Price

Call For Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

1999 Peterbilt/LDI Polyurea Striping Truck

CLICK IMAGE TO ENLARGE

Features

  • 64,000 GVW
  • Originally Epoxy – recently converted to Polyurea
  • 3 Proportioning pumps
  • Double drop bead system

Price

Call For Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

1995 Ford CF/Morton Traffic Paint Striping Truck

CLICK IMAGE TO ENLARGE

Features

  • 13,000    23,000    36,000 GVW  (Reg. 33,000)
  • Airless Spray System
  • Rear Operators Cab

Price

Call For Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

2014 Grinder Truck

CLICK IMAGE TO ENLARGE

Features

  • 2014 Kenworth 66,000 miles/2800 hours.
  • 2014 MRL 3-610-AD-5K Line Removal/Grooving System – 2100 hours.
  • Does not include heads.

Price

Call For Pricing

Contact


406-869-9900

2000 GMC Thermo Truck

CLICK IMAGE TO ENLARGE

Features

  • Miles – 278,871

Price

Call for Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

1996 GMC Thermo Truck

CLICK IMAGE TO ENLARGE

Features

  • 371,322 Miles

Price

Call for Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

1998 LDI Thermoplastic Truck

CLICK IMAGE TO ENLARGE

Features

  • CHASSIS:
  • 1998 GMC T7500, GVW 33,000 Lbs
  • Engine – 7.2L Cat 3126 Diesel 210
  • Transmission – MP 3060 Auto Pushbutton 6 Speed
  • 12V Dual Batteries, 100 Amp Alternator
  • Dual Steering Control, 96,495 Miles
  • BACKEND:
  • Material Tank – 3500 Lbs Pressurized Oil Jacketed with Air Agitator
  • Dual Loading Ports (Left & Right)
  • Bead System – 1000 Lbs Pressurized Tank with Moisture Trap
  • Ingersoll Rand 185 CFM with John Deere Diesel Compressor
  • Spray Ribbon Guns/Kamber 90 HD Glass Guns
  • Skipline System – SE 88 Fully Programmable System with Footage Counter
  • David Clark Intercom System

Price

Call for Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

2001 LDI Thermo Truck

CLICK IMAGE TO ENLARGE

Features

  • CHASSIS:
  • 2001 Sterling SC8000
  • GVW 33,000 Lbs, Front – 12,000, Rear – 21,000
  • Engine – ISB 225 HP Turbo Diesel
  • Allison MT6530R 5 Speed Transmission
  • Air Brakes, 100 Gal Fuel Tank, 83,830 Miles
  • BACKEND:
  • Two (2) 175 Gal Pressurized Oil Jacketed Tanks
  • Dual Loading Ports, Air Operated Heavy Duty Agitators
  • Gun Carriage to allow for 3 guns left and 1 gun right
  • Two (2) 520 Lb Pressurized Bead Tank with Moisture Traps
  • Two (2) 375 Lbs Gravity Bead Hopper
  • LeRoi 250 CFM Air Compressor
  • LDI SE-88 Skipline System, Fully Programmable

Price

Call for Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com

MRL 4-12,000 Pumper Truck

CLICK IMAGE TO ENLARGE

Features

4 – 3000 LB LP Fired Melters – Replaced in 2009
Twin 2100 LB Bead Tanks “Double” Drop System
IL 10 Moyno Material Pumps
260 CFM Sulliar Compressor – 7,954 Hours
Cummins 96 HP Turbo Pony Motor – 11,587 Hours
Full Safety Lighting Package
2006 Condor Chassis – 147,547 Miles
330 HP Cummins ISL Turbo Diesel
Allison 4000RDS 6 Speed Automatic Transmission
100 Gallon Fuel Tanks

Price

Call for Pricing

Contact

Kent Klein, Jonathan Gonitzke, or Jim Spielman
406-869-9900
kklein@markritelines.com
Call us today!

1-877-788-2907

Let’s discuss how our productive designs can “go to work” for your organization.

Providing Global Solutions

Global Solutions Map

Subscribe to MRL eNews

innovative manufacturers of performance oriented marking application and removal equipment