Trucks & Equipment

Removal & Grooving

Yellow dashed border

Precision

MRL Equipment Company’s multiple-head, progressive removal system ensures minimal surface damage without sacrificing speed.

Products

Yellow dashed border
MRL Logo

GrindPro™ Removal Truck (CDL)

CLICK IMAGE TO ENLARGE

Videos

The MRL GrindPro™ Removal Truck (CDL) is a versatile design that provides line removal grinding, high-speed pavement grooving, plunge-type saw cuts, slot-type saw cuts, and curing compound removal. A commercial driver’s license is required.

The GrindPro™ Removal Truck (CDL) series is available in GrindPro™ 220, GrindPro™ 420, and GrindPro™ 620.

  • 20″/50.8 cm-diameter multiple-head removal system provides removal with minimal surface damage and debris vacuum.
  • Hydrostatic chassis drive system available for precise speed control down to one-tenth mph/.16 kph.
  • Optional tools provide inlaid marking capability, slot-cut raised pavement marker capability, and plunge-cut snow-plowable marker capability.
  • An efficient hydraulic system provides ample power to removal heads, vacuum fan motor, and air compressor.
  • Hydraulic oil coolers and efficient oil filtration system.
  • Efficient dust and debris vacuum system enables environmentally safe containment of potentially hazardous fine particulates.
  • Optional “one-man” equipment operation enables labor savings in some job situations.
  • Auger-dump or bottom-dump for easy offloading debris. High-dump option available.
  • Extensive, industry-leading service and parts support from MRL’s experienced staff.
  • Comprehensive parts and service manual.

GrindPro™ Removal Truck (non-CDL)

CLICK IMAGE TO ENLARGE

Videos

The MRL GrindPro™ Removal Truck (non-CDL) is a versatile design that provides line removal grinding, high-speed pavement grooving, plunge-type saw cuts, slot-type saw cuts, and curing compound removal. No commercial driver’s license is required.

The GrindPro™ Removal Truck (non-CDL) is available in GrindPro™ 220 and built on 26,000 GVWR chassis.

  • Two 20″/50.8 cm-diameter heads provide removal with minimal surface damage and debris vacuum.
  • Hydrostatic chassis drive system available for precise speed control down to one-tenth mph/.16 kph.
  • Optional tools provide inlaid marking capability, slot-cut raised pavement marker capability, and plunge-cut snow-plowable marker capability.
  • An efficient hydraulic system provides ample power to removal heads, vacuum fan motor, and air compressor.
  • Hydraulic oil coolers and efficient oil filtration system.
  • Efficient dust and debris vacuum system enables environmentally safe containment of potentially hazardous fine particulates.
  • “One-man” equipment operation enables labor savings in some job situations.
  • Tilt dump for easy offloading of debris.
  • Extensive, industry-leading service and parts support from MRL’s experienced staff.
  • Comprehensive parts and service manual.

Mini Grinder

CLICK IMAGE TO ENLARGE

Videos

The MRL Mini Grinder offers excellent versatility in limited work zones. Designed to remove pavement markings, groove for inlaid markings, and slot cut for raised pavement marker installation. Agile, compact design enables efficient production in congested work areas.

  • 8″/20.3 cm diameter cutting heads with the ability to cut up to 13″/33 cm wide.
  • Accepts PCDs, diamond blades, or carbide cutter drums.
  • 1500 CFM vacuum system/42.5 CMM vacuum system.
  • 67  ft3/0.08 m3 of debris storage in easy-to-handle 5 gal./19 L plastic buckets.
  • Easy-load trailer with debris storage bin is available.
  • Extensive, industry-leading service and parts support from MRL’s experienced staff.
  • Comprehensive parts and service manual.