.png?width=207&height=150&name=MRL_Logo_w_FS_tagline%20(10).png "MRL_Logo_w_FS_tagline (10)"){kind=logo}
-2.png?width=207&height=150&name=MRL_Logo_w_FS_tagline%20(9)-2.png "MRL_Logo_w_FS_tagline (9)-2"){kind=logo}
2025 Mini GrinderPro
Features
The MRL Mini GrinderPro offers excellent versatility in limited work zones. This self-propelled ride-on unit is designed to remove pavement markings, groove for inlaid markings, and slot cut for raised pavement marker installation. Agile, compact design enables efficient production in congested work areas.
- 8″/20.3 cm diameter cutting heads with the ability to cut up to 13″/33 cm wide; accepts PCDs, diamond blades, or carbide cutter drums.
- 1500 CFM vacuum system/42.5 CMM vacuum system.
- 2.67 ft3 of debris storage/0.08 m3 of debris storage.
- Easy-load trailer with debris storage bin is available.
- Extensive, industry-leading service and parts support from MRL’s experienced staff.
- Comprehensive parts and service manual.
Contact
MRL Sales at sales@markritelines.com
David Kautz - dkautz@markritelines.com
Kent Klein -
Brian Pardoe -
Justin Schmidt -
2025 Mini MacPro® 400 Thermoplastic Striper
Features
The MRL Mini MacPro® 400 Thermoplastic Striper offers excellent versatility in a compact, productive design that quickly applies detail markings.
- 400 lb/181 kg capacity material tank.
- Powered by a 25-hp LP-fueled engine.
- 100 lb/45 kg double-drop bead application system.
- Durable material pump integral to the oil-jacketed material tank.
- Easily adjustable thermoplastic extrusion dies and spray guns enable quick stripe width changes.
- Right-side application.
- LED work lights to illuminate the work area.
- Laser line guidance enables quick machine alignment.
- Simple operator controls.
- Extensive, industry-leading service and parts support from MRL’s experienced staff.
- Comprehensive parts and service manual.
MRL Sales at sales@markritelines.com
David Kautz - dkautz@markritelines.com
Kent Klein -
Brian Pardoe -
Justin Schmidt -
2025 ThermoPro Pre-Melter Kettles
Features
MRL’s ThermoPro™ Pre-Melting Kettles offer superior production capabilities in a self-contained, safe, durable, skid-mounted, air-jacketed vertical design.
- Currently have 1K, 1.5K, and 2K sets that are completing production
Contact
MRL Sales at sales@markritelines.com
David Kautz - dkautz@markritelines.com
Kent Klein -
Brian Pardoe -
Justin Schmidt -
New Federal Signal Monitor for back up camera
Features
FS 5.6" Color TFT LCD Monitor with 2-camera input integrated control box - Monitor Only, Rear View
Used to sell at $378.
While supplies last $100.
Contact
MRL Parts at parts@markritelines.com
New Hydrostatic Variable Pump - Berendsen Fluid Power
Features
https://powersource.danfoss.com/products/pumps/mobile-pumps/mobile-piston-pumps/mobile-closed-circuit-piston-pumps/series-90-piston-pumps-emea/p/83012881
While supplies last $3,900.00
Contact
MRL Parts at parts@markritelines.com
New Reel Mount for 1/2" hose, 50ft auto retractable
While supplies last $750
Contact
MRL Parts at parts@markritelines.com
New Solvent Cup - CARLISLE FLUID POWER
While supplies last $50
Contact
MRL Parts at parts@markritelines.com
New Upper Packing Nut- CARLISLE FLUID POWER
While supplies last $200
Contact
MRL Parts at parts@markritelines.com
2020 Starjet Waterblaster NLB
Features
-
2020 Starjet Waterblaster
49,611 miles
1118 hrs. on aux engine
Contact
Jonathan Gonitzke
(406) 670-9002
jgonitzke@highmarktraffic.com
2010 MRL GrinPro 4 Box
Features
2020 MRL Grinder
111,926 miles
2800 hrs. on aux powerplant
Contact
Jonathan Gonitzke
(406) 670-9002
jgonitzke@highmarktraffic.com
New MRL Thermo 4-8000 Truck
Features
A brand new MRL Thermo truck will be available around May 15th. This truck is for sale by Owner.
4-8000 Thermoplastic Truck
- Low-Hour Customer Supplied Paletech 260 CFM Compressor
- Dueal Diesel Burners
- Single Drop Bead system
- C/L Carriage - 2 Yellow Guns, 1 dedicated White
- E/L - 1 white gun
- MRL Roper pumps
- 3000Lb ASME Cert Bead Tank
- Canadian Compliant chassis
Contact
Pierre Brousseau @ Total Traffic - 416-407-7711
2020 6-120-Epoxy Truck
Features
-
Epoxy Marker truck
-
26K GVW Non-CDL truck
-
60 gal tanks
-
13 CFM Air Compressor
-
PTO Hydraulic System
-
Epic Solutions Timing & Control System
-
2 Graco 2400 pump assembly
-
MRL Safety strobe and light package
-
Plural component technologies hand gun assembly
-
Custom tailboard for operator to hold markers
Contact
Stripes & Stops - Steve McKinley - 713-882-1651
2022 Thermo Hog
Features
-
Thermo Hog Truck
-
47,144 Miles
-
3366.9 hours
-
Compressor Hours 2775.3
Contact
Riverside Traffic Systems - Trent Clark - 662-316-3740
2006 Isuzu 4 Head Grooving Truck
Features
Equipped with diamond blades up to 13” cut width on rear heads and 9” on front heads. Hydraulic pointer and camera system, two-way radio, strobe lights, arrow board, manual marking system, high lift dump, Donaldson filter system for vacuum, David Clark headsets John Deere 6.8L powertech aux engine 192,000 mi
Contact
Jon Baker
Fleet Director
203.333-6870 Main ext 432
Direct 203.814.3432
Cell 203.619.3674
2006 Isuzu 4 Head Grinding Truck
Features
Equipped with Carbide and hardened steel flail cutters 7” removal width on all heads. Hydraulic pointer and camera system, two-way radio, strobe lights, arrow board, manual marking system, high lift dump, Donaldson filter system for vacuum, David Clark headsets John Deere 6.8L powertech aux engine 98,000 mi
Contact
Jon Baker
Fleet Director
203.333-6870 Main ext 432
Direct 203.814.3432
Cell 203.619.3674
1998 Ford F-800 Thermo Kettle Truck
Features
Equipped with two-way strobe lights, arrow board, side liftgate, and crash barrier mount (barrier not included ) 2K MRL diesel fired Melters with Kubota diesel engine 176,000 mi
Contact
Jon Baker
Fleet Director
203.333-6870 Main ext 432
Direct 203.814.3432
Cell 203.619.3674
2003 International 4300 Thermo Kettle Truck
Features
Equipped with two-way radio, arrow board, strobe lights, and tow hitch 2K MRL diesel fired melters with Kubota diesel engine
166,267 mi
Contact
Jon Baker
Fleet Director
203.333-6870 Main ext 432
Direct 203.814.3432
Cell 203.619.3674
2013 MRL Epoxy Truck - 75 gallons each color
Features
3,000 mi
Engine Hours 630
Contact
Contact: Dan Swayze
Phone: 908-296-4489
2020 MRL ALS Paint 3 color 1-640
Features
109.8hrs on the compressor
5679 miles on the chassis
Contact
Contact: John Currier
Phone: 701-541-0574